619 - Flow Measurement Trainer

Product Dimensions
(L x W x H)
63in. x 24in. x 40in. (1600 x 600 x 1275 mm)
255lbs. (116kg)

Shipping Dimensions
325lbs. (147kg)

A working, large-scale, flow-related, fluid process system allowing for hands-on training relating to the installation, calibration and maintenance of process field instruments, within a controlled working environment. The device includes a 15 gallon reservoir, and a 3/4in. pipe diameter process loop, with replaceable spool section. Three common flow metering devices, mounted in pipe spools are included. An “open architecture” allows for installation of optional instruments of various designs from a variety of manufacturers within the removable spool section.

Using an optional component package, the product can be used for studies relating to pressure drop within piping systems and through piping components.
Welded steel frame workstation, using 14-gauge, 1-1/2" x 1-1/2" tube, and incorporating two 14-gauge support shelves.
Four casters, two with locks.
T-slotted aluminum instrument stanchion mounting rails.
Clear, 3/4" diameter, PVC piping and fittings throughout.
Brass metered ball valve.
Variable-area flow meter.
Removable 24" pipe spool allowing for installation of standard flow apparatus, as well as optional flow instruments.
Pitot tube flowmeter spool, with tubing quick-connect fittings.
Orifice plate flowmeter spool, with tubing quick-connect fittings.
Venturi tube flowmeter spool, with tubing quick-connect fittings.
Pipe spool storage rack.
Control/power assembly including 19" rack-mounted control panel, steel support frame, and electrical enclosure.
Panel-mounted components including; pilot light, on/off switch, pump control switch with contacts for remote operation, GFI circuit protection, fuses, process meter with mA input, pressure regulator, pressure gauge and air quick-connect couplings.
Pump motor starter.
24 VDC power supply with banana jack connections.
Primary reservoir, 15 gallon capacity.
Pipe stanchion, allowing for attachment of differential pressure transmitters and pressure transmitters at varying locations, and heights.
High-durability, powder coated surfaces throughout.
Crating for shipment via motor freight.
#080-467-4 - Video on flow measurement (ISA).
#581-022 - Textbook, Calibration: A Technician's Guide (Cable).
#600-005 - Supplementary, Free-Standing Instrument Rack.
#600-025 - Vortex-type flow meter.
#600-033 - Coriolis effect flow meter, Hart (Emerson, MicroMotion)
#600-034 - Paddle-type flow measurement assembly/transmitter (Omega).
#600-035 - Turbine-type flow measurement assembly/transmitter (Omega).
#600-036 - Magnetic flow measurement assembly/transmitter (Rosemount).
#600-051 - Strip chart recorder, 2-pen (Yokogawa, SR 1000) (additional).
#600-053 - Square root extractor, panel mounted (requires #940F or #600-005).
#600-056 - Differential pressure transmitter, supplemental.
#600-059 - 3-Valve manifold (supplemental).
#600-066 - Supplemental PID controller and I/P converter panel.
#600-105 - Differential pressure gauge, low range (0-400in. H20)
#619-001 - Supplementary, flow of fluids, pipe spool assortment, 7-piece.
#619-500 - Additional Use/Exercise Guide.
#619-PAC - Quick-Start Measurement Package, including: #619, #600-056, #600-059, #600-105.
#940-001 - Control Module Base Assembly.
#940F - Control Module Assembly Frame (for supplemental panels).
* (100), 1/4in. Diameter instrument connection tubing, of two colors. * (6), Quick-disconnect nipples. * (6), Tubing tees. * (6), Tubing couplers. * (3), Orifice plates. * Use/Exercise Guide.
110 VAC. Alternate voltage, phase and cycle requirements are possible.
The courseware, useful in both an instructor-led or self-directed format, includes a Use Guide, a course map linking the exercises to a related textbook and six hands-on experiments.

Exercises include:
* Introduction to the DAC #619 Flow Measurement Trainer. * Flow vs. Differential Pressure for an Orifice Plate. * Flow vs. Differential Pressure for a Pitot Tube Assembly. * Flow vs. Differential Pressure for a Venturi Tube. * Calibration of a Flow Transmitter. * Calibration of a Square Root Extractor. * Installation and Calibration of a Flow Measurement Channel.


In accordance with DAC’s established policy of continuous improvement, these specifications and product descriptions are subject to change without notice. This information is the latest technical information as of the time of viewing or printing.