617 - Level Measurement Trainer

Product Dimensions
(L x W x H)
23in. x 34in. x 76in. (590 x 865 x 1930 mm)
195lbs. (89kg)

Shipping Dimensions
(L x W x H)
39-1/4in. x 27in. x 85in. (997mm x 686mm x 2159mm)
300lbs. (130kg)

A working, large-scale fluid process system allowing for hands-on training relating to basic hydrostatic principles, as well as the installation, calibration and maintenance of process field instruments, using a column of water. The device includes a 3-gallon, 36in. high, clear acrylic tank, and a 15-gallon reservoir. An “open architecture” allows for installation of instrumentation of various designs from many manufacturers at multiple locations within the system and on the tank, using quick-connect fittings.

With optional and/or user-supplied equipment, the device can be used for creation of basic process loops relating to level control, using a variety of measurement and control methods.
Welded steel frame, using 14-gauge, 1-1/2" x 1-1/2" tube, and 1/8" plate.
Four casters, two with locks.
Front panel faces fabricated from 1/8" aluminum sheet.
Clear, 1/2" diameter, PVC piping and fittings throughout.
Clear acrylic process tank, 3-gallon capacity.
Wet leg demonstration tube, fabricated from clear PVC pipe.
Primary reservoir, 15-gallon capacity.
Centrifugal pump, 1/4 HP, with inlet strainer.
GFI circuit protection.
Tank overflow protection.
Power distribution panel/electrical enclosure, mounted on 19" rack panel and including, on/off power switch, pilot light, fuses for all circuits, pump power switch with provision for external control via relay, 110/240 VAC service connections and motor controller.
24 VDC power supply, with banana jack connections.
Quick-disconnect fittings located throughout, allowing for attachment of instruments, accessories, and optional equipment.
Pipe stanchion, allowing for attachment of optional pressure gauges, pressure switches, differential pressure transmitters and pressure transmitters at varying heights.
Crating for shipment via motor freight.
#080-467-2 - Video on pressure measurement (ISA).
#600-005 - Supplementary, Free-Standing Instrument Rack.
#600-022 - Ultrasonic level detector assembly, economy.
#600-048 - Supplemental air regulator/gauge assembly.
#600-051 - Strip chart recorder, 2-pen (Yokogawa, SR 1000) (additional).
#600-056 - Differential pressure transmitter, supplemental.
#600-059 - 3-Valve manifold (supplemental).
#600-065 - Bubbler (dip tube) assembly (requires #940F or #600-005).
#600-066 - Supplemental PID controller and I/P converter panel.
#600-067 - Differential pressure switch assembly.
#600-106 - U-tube manometer (-36in. - 0 - 36in. range).
#600-107 - Differential pressure gauge (-50in. - 0 - +50in. H2O).
#617-047 - Supplemental diaphragm-type control valve assembly, downsized.
#617-500 - Additional Use/Exercise Guide.
#617-CTL - Quick-Start Control Package, including: #617, #617-047, #600-066, #600-067, #600-056, #600-059.
#617-PAC - Quick-Start Measurement Package, including: #617, #600-056, #600-107, #600-059.
#940-001 - Control Module Base Assembly.
#940F - Control Module Assembly Frame (for supplemental panels).
* (100'), 1/4in. Diameter instrument connection tubing. * (8), 36in. Test leads. * (4), 60in. Test leads. * (8), Quick-disconnect nipples. * (6), Tubing tees. * (6), Tubing couplers. * (1), Pressure gauge, 0-3 psig. * (2), 250 ohm conversion resistors. * Use/Exercise Guide.
110/240 VAC, 50/60Hz.
The courseware, useful in both an instructor-led or self-directed format, includes eight, hands-on exercises.

Exercises include:
* Introduction to the DAC #617 Level Measurement Trainer * Principles of hydraulic pressure. * Level measurement using a bubbler assembly. * Effects of level sensor position. * Level measurement with a dry reference leg. * Level measurement with a wet reference leg. * Installation and calibration of a level measurement channel. * Installation and calibration of a level measurement channel with zero elevation and suppression.