429E - AC Variable Speed Drive Trainer, Extended, PowerFlex 40

Product Dimensions
(L x W x H)
19in. x 20in. x 24in. (480 x 6508 x 10 mm)
68lbs. (31kg)

Shipping Dimensions
(L x W x H)
21in. x 24in. x 30in. (533 x 609 x 762mm)
105 lbs. (48 kg)

A portable, benchtop training system allowing for convenient training in AC drive programming, drive system troubleshooting and control wiring.

All I/O and control wiring capabilities of the Allen-Bradley, PowerFlex 40 drive are accessed using banana jack connections on the front panel face. Additionally, eight fault switches are provided on the back of the electrical enclosure allowing for drive, motor and control wiring troubleshooting. A digital tachometer is provided.

The product can be easily integrated with mechanical systems on the related DAC bench products, as well as with products relating to PLCs, sensors and piloting switches.

Whether used as a stand-alone training device or in combination with other automation-related training products, this device will help make training in this fundamental technology more informative and productive.
Welded tubular aluminum baseplate with t-slotted mounting rails for mounting a 56-frame motor (allows for attachment to the DAC 419 Motor Loading Device).
Powder-coated, 16-gauge, steel electrical wiring enclosure and support frame assembly (can be mounted directly on the DAC 905 Electromechanical Bench).
Industrial, 3-phase, inverter-duty, 1/2 hp. motor.
3-Pole circuit breaker with provision for lock-out/tag-out.
Pilot light and emergency stop switch.
Safety interlock, de-energizing internal wiring upon removal of front panel face.
Silk-screened panel face identifying all components, wiring points and test point locations.
Keyed instructor switch (rear of device).
Simulated remote operator control panel with pre-wired switches.
Twenty-nine banana jack connections for all drive I/O points and control interface connections.
Thirty-five tip-jack (test) connections for troubleshooting motor, drive and control wiring.
Digital tachometer with magnetic pick-up.
Permanent internal ground wiring.
Eight instructor fault switches (rear of device).
Allows for connection to DAC 464, 428 trainers and within automation arrangements on the 905/210 Electromechanical Bench.
Allen-Bradley, PowerFlex 40 variable frequency drive with integral keypad and features as follows:
     Remote potentiometer input; Adjustable frequency.
     115 or 220 VAC input; Single or three phase, 50/60Hz.
     Output: 2.3 A; 0.37 kW (0.5HP); Voltage adjustable from 0V to input voltage, 0-400Hz.
     Analog Input: 0-10V, 4-20mA.
     Inputs/Outputs: 3 Inputs; voltage, resistance, and amperage. 3 Outputs; voltage, relay, and amperage.
     PLC Data (8 inputs).
     Optional DC dynamic braking.
     Current limiting protection.
     Programmable acceleration/deceleration, and on-board PID control loop.
     Integral communication RS485.
     Multiple Languages: English, Spanish, German
Crating for shipment via motor freight.
#040-747 - Video series, 2-part, titled, "AC Motor Control & Troubleshooting" (Industrial Text & Video).
#429-500 - Use/Exercise Guide (Additional)
#429-500C - Use/Exercise Guide (On Disc) (Additional)
#429-500D - Use/Exercise Guide (Via E-mail) (Additional)
Use/Exercise Guide.
220-240 VAC, 3-Phase, 220 VAC single phase, 110 VAC with optional transformer.
The standard courseware includes 26 exercises as follows:
* Introduction to the DAC #429E Variable Frequency Drive Trainer, Extended - PowerFlex40 * Variable Frequency AC Drive Theory, Terms and Abbreviations. * Investigating the Electrical Connections of the Allen-Bradley PowerFlex 40 Variable Speed Drive. * Checking the Nameplate Data. * Preforming Pre-Power Checks and Start Up. * Familiarization with the Front Panel Control and Indications. * Resetting the AC Drive Parameters to the Factory Defaults. * Checking and Setting Minimum and Maximum Frequency. * Checking and Setting Acceleration and Deceleration Timing. * Programming Over Current Safety Features. * Familiarization With Nameplate Parameters. * Checking and Setting Jog Parameters. * Observing and Plotting the Ramping Characteristics. * Programming and observing the Skip Frequency and Skip Frequency Bandwidth Controller Functions. * Programming Operating Frequencies (Motor Speeds). * Programming AC Drive Outputs. * Using External Voltage and Current Sources of Motor Control. * Introduction to Troubleshooting. * Troubleshooting Exercises (8 Exercises Provided)

This device has been designed for professionals for use under controlled circumstances for training only. DAC assumes no liability for injury resulting from the use or misuse of this product.
In accordance with DAC’s established policy of continuous improvement, these specifications and product descriptions are subject to change without notice. This information is the latest technical information as of the time of viewing or printing.